La marque française de lubrifiants ouvre le premier de ses trois nouveaux laboratoires de recherche et développement en Seine-et-Marne. Objectif : développer des produits plus durables ainsi que des fluides pour les véhicules électriques.
Produits
Batterie : mutations à suivre pour les indépendants
Face aux progrès technologiques de l'industrie automobile, distributeurs et réparateurs doivent rester attentifs à ces évolutions pour continuer à remplacer les batteries basse tension. En effet, ce marché poursuit sa transformation, de plus en plus rapide.
Caméras d'inspection : avec ou sans écran ?
Outil indispensable en atelier pour inspecter les espaces les plus difficiles d'accès d'un véhicule, la caméra d'inspection (ou endoscope) se présente avec écran intégré ou sans. Chaque version dispose de ses avantages.
CTEK : diversification et savoir-faire pour conquérir le marché de la recharge
Le spécialiste suédois de la recharge de batterie poursuit la diversification de son catalogue. CTEK met ainsi l'accent sur ses gammes d'outils de redémarrage de véhicules thermiques et ses chargeurs pour modèles électriques.
TMD Friction déploie la marque Don en France
TMD Friction complète son portefeuille de produits en France en annonçant le lancement de sa marque de freinage Don pour les VL et VUL. Développée pour offrir un rapport qualité/prix optimal, la gamme couvrira 97 % du parc automobile européen.
Superéthanol : Biomotors lance un nouveau kit pour des conversions plus efficaces
Biomotors innove avec BIOFlex AIR, un système breveté qui optimise la conversion au Superéthanol E85. Ce nouveau kit simplifie l’installation, améliore le rendement des moteurs et réduit la surconsommation de carburant, tout en rendant la conversion plus accessible aux automobilistes.
Clas à l'assaut du diagnostic automobile
Le spécialiste français de l'équipement d'atelier a profondément remodelé l'ensemble de ses gammes. Parmi ses nouveautés, Clas devient distributeur officiel des outils de diagnostic de la marque Thinkcar. Autant d'efforts qui nourrissent la croissance de l'entreprise.
MAIA de Maha : le robot qui révolutionne l'inspection de véhicules
Avec la présentation de son robot de réception active, le fournisseur d’équipements de garage a marqué les esprits lors du salon Automechanika 2024, à Francfort. Maha prévoit d'automatiser l’accueil des véhicules dès l’an prochain. Ce n’est cependant pas la seule innovation technologique de la marque destinée aux réparateurs et contrôleurs techniques...
Mega macs S 20, le nouvel outil de diagnostic de Hella Gutmann
Le mega macs S 20 de Hella Gutmann propose une solution de diagnostic multimarque moderne, flexible et accessible, compatible avec les appareils Android. L’outil est doté de fonctionnalités évolutives grâce à ses modules logiciels.
Napa fait briller les voitures
La marque d’Alliance Automotive Group lance une gamme de solutions de nettoyage destinée aux professionnels et aux particuliers. Napa a fait le choix d'une conception écoresponsable pour ces produits, composés à base d’eau de pluie recyclée et de composants végétaux.
Adas : Hella Gutmann passe à la vitesse supérieure avec le CSC-Tool X 20
Profitant du salon Automechanika Francfort, Hella Gutmann a présenté son dernier outil de calibration d’Adas, le CSC-Tool X 20. L’équipement propose un processus d'étalonnage numérique guidé pour renforcer la précision de ces opérations à l’atelier.
Actia Multi-Diag : deux décennies au service des réparateurs
Actia fête les 20 ans de son outil de maintenance électronique Multi-Diag. À cette occasion, le groupe toulousain revient sur les grandes innovations de sa solution, dont sa dernière interface de communication, l’ACI3, commercialisée depuis la rentrée.
Hunter Engineering révolutionne les Adas à Automechanika 2024
Le fabricant d'équipements de garage Hunter Engineering dévoile en avant-première en Europe sa dernière solution de calibration d'Adas au salon de Francfort (Allemagne). Cet appareil, baptisé Ultimate Adas, élimine un grand nombre de configurations manuelles.
Getac lance le premier ordinateur durci "AI-Ready"
Spécialiste des solutions informatiques renforcées, Getac dévoilera le premier ordinateur portable "AI-Ready" à Automechanika Francfort. Avec cette innovation, la marque entend accroître l'efficacité et la productivité dans le secteur automobile.
Würth France complète sa gamme de clés dynamométriques
Würth France complète sa gamme de clés dynamométriques destinées aux professionnels. Les nouveaux outils de la gamme Premium se distinguent par leur précision ainsi que leurs écrans intégrés.
KS Tools lance une servante made in France
L'outilleur KS Tools dévoile sa toute première servante d’atelier fabriquée en France. Dotée d'un système anti-basculement, elle sera disponible dès ce mois de septembre 2024.
Second souffle pour Airoutil
La marque française d'outillages pneumatiques d’atelier renaît de ses cendres. Sous l’impulsion de Guillaume de Bel Air, Airoutil revient sur le marché en pariant sur la relation directe avec les réparateurs, via le canal e-commerce.
Motul lance ses nouvelles huiles durables : Ngen 4 et Ngen 6
Motul présente sa nouvelle gamme d'huiles moteur durables, baptisées Ngen 4 et Ngen 6. Ces produits, contenant jusqu'à 65 % d'huile de base régénérée, offrent des performances techniques équivalentes aux lubrifiants traditionnels tout en réduisant l'impact environnemental.
Würth France ouvre un nouveau concept de magasin-entrepôt près de Lyon
Würth France s'est doté d'un nouveau site à Vaulx-en-Velin (69), combinant un magasin Proxi Shop et un entrepôt logistique. Ce concept inédit, baptisé Proxilog, vise à optimiser la livraison sur le dernier kilomètre et à proposer des solutions de livraison sur-mesure.
FFED lance sa station de dépollution pour les deux-roues
Quelques mois après l'instauration du contrôle technique des véhicules de catégorie L, FlexFuel Energy Development (FFED) déploie Hy-Carbon 1000R. Il s'agit d'une station de nettoyage des moteurs des deux-roues par injection d’hydrogène.
TotalEnergies rachète Tecoil et s'engage dans l'économie circulaire
Dans de le cadre de sa stratégie d'économie circulaire, TotalEnergies procède à l'acquisition de l'entreprise finlandaise Tecoil, spécialisée dans la régénération d'huiles usagées.
TotalEnergies lance ses premières gammes de lubrifiants avec des huiles de base régénérées
Le pétrolier dévoile ses nouvelles gammes de lubrifiants Quartz EV3R et Rubia EV3R, à base d'huiles régénérées. Selon TotalEnergies, ces produits offrent des performances similaires aux huiles conventionnelles, tout en étant respectueux de l'environnement.
Airoutil fait son retour dans la réparation automobile
Créée en 1983, la marque Airoutil relance son activité. Elle propose un nouveau catalogue d’outils et d’équipements spécialisés dans le domaine de la carrosserie automobile et du poids lourd.
Bosch étoffe son offre de pièces de direction avec des kits
L’équipementier augmente son offre de pièces de direction. Avec ces kits dédiés, Bosch propose ainsi aux réparateurs et à leurs distributeurs des gammes étendues pour améliorer la disponibilité de ces organes de sécurité.
Des solutions lumineuses pour les garages
À l'atelier, le réparateur néglige souvent l'ergonomie de son poste de travail, à commencer par l'éclairage. Pourtant, les lampes baladeuses ont connu une évolution significative. Désormais sans fil et équipées de LED, elles se déclinent sous différentes formes pour satisfaire les attentes des professionnels.
Hella Gutmann dévoile son réglophare intelligent
La marque allemande d’outils et d’équipements d’ateliers, Hella Gutmann, lance le SEG V, un réglophare numérique de dernière génération. L’appareil a été conçu pour le contrôle et la réparation des systèmes d’éclairage les plus complexes.
Einhell lance un compresseur à air "tout-en-un"
Le nouveau compresseur à air Pressito 18/25 Hybrid d'Einhell, fonctionnant sur batterie et secteur, offre une polyvalence avec ses pompes haute et basse pressions ainsi que sa fonction d'aspiration. Compact et facile à transporter, l'appareil fournit une puissance maximale de onze bars.
Facom dévoile sa nouvelle clé mixte pour les applications de serrage les plus difficiles
Facom innove avec sa nouvelle clé mixte longue série 441, dotée d'un grip supplémentaire pour faciliter le serrage et desserrage. Grâce à son profil OGV Grip, cet outil polyvalent a été conçu pour répondre aux exigences des professionnels de l’automobile.
Autobacs commercialise son huile moteur en libre-service
Le réseau de centres autos Autobacs vend désormais ses huiles moteur en libre-service. Jusqu'ici, les lubrifiants étaient destinés à un usage professionnel, dans les ateliers de l'enseigne.
TotalEnergies Lubrifiants dévoile son standard de spécification de fluides pour VE
Le groupe pétrolier a multiplié les essais pour développer sa première spécification dédiée aux huiles pour systèmes de propulsion électrique. TotalEnergies Lubrifiants détaille les étapes de son processus.
Gys simplifie la soudure de goujons avec le Capatek 66 FV
Gys présente son Capatek 66 FV, un générateur industriel conçu pour souder efficacement des goujons de M3 à M8 sur divers matériaux. Avec sa technologie avancée et son pistolet ergonomique, il offre une cadence de soudage rapide et évite les marques et déformations sur les tôles fines.
KS Tools présente sa servante "Carbone" en édition limitée
"Carbone", c'est le nom choisi par la marque d'outillages KS Tools pour sa dixième servante proposée en édition limitée. Destinée aux ateliers automobiles, elle est composée de deux niveaux d'équipement et se distingue par sa finition noir mat.
Shell accroît les performances de ses huiles Helix Ultra
Shell lance trois nouveaux lubrifiants haute performance destinés aux véhicules particuliers, sous sa gamme Helix Ultra. Ces huiles, qui bénéficient de la technologie PurePlus, ont été développées notamment pour optimiser la puissance des moteurs et améliorer leur rendement énergétique.
Les ponceuses Mirka Deros II et Deos II : plus puissantes et ergonomiques
La marque finlandaise dévoile la nouvelle génération de ses ponceuses électriques Deros et Deos. Bénéficiant d’améliorations significatives, elles offrent une puissance de ponçage renforcée, un confort d'utilisation amélioré et des fonctionnalités avancées pour un travail plus efficace et plus sûr.
TechPRO 2 et Brain Bee Connex 2, les nouveaux outils de diagnostic de Mahle
L'équipementier allemand Mahle lance la nouvelle génération de ses outils de diagnostic TechPRO et Brain Bee Connex. Ces solutions offrent une interface repensée ainsi que des fonctionnalités améliorées pour un diagnostic plus rapide et plus efficace.
Clas en mode électroportatif
Le spécialiste de l'outillage et de l'équipement d'atelier lance une nouvelle gamme de solutions électroportatives, garantie trois ans. Clas veut répondre aux besoins de mobilité dans et hors des garages.
Indasa lance son godet de peinture ingénieux
Le spécialiste des abrasifs dispose désormais d'une gamme d’équipements complète, depuis l’aire de préparation de la carrosserie jusqu'à la cabine de peinture. Parmi ses derniers produits, Indasa propose notamment un godet de peinture particulièrement innovant.
Quand les ateliers se préparent à l'électrique
Avec la hausse des ventes de véhicules électrifiés, les ateliers doivent s'équiper en conséquence. Ils ont désormais à leur disposition plusieurs gammes d'équipements et d'outillages selon les interventions à réaliser.
Le vieillissement du parc freine le déclin du marché des lubrifiants
Le marché des lubrifiants automobiles a connu une baisse de 2,5 % en 2023, selon le Centre professionnel des lubrifiants (CPL). Un déclin attendu en raison notamment de la hausse des ventes de véhicules électriques. Mais le vieillissement du parc laisse entrevoir quelques signes d'optimisme.
Tout le monde veut sa part du turbo
Un nombre croissant d'acteurs arrive sur le marché de cette pièce technique. Mais l'après-vente de turbocompresseurs reste exigeante. Nous assistons donc à une bataille autour des services et des prix.