Outil indispensable en atelier pour inspecter les espaces les plus difficiles d'accès d'un véhicule, la caméra d'inspection (ou endoscope) se présente avec écran intégré ou sans. Chaque version dispose de ses avantages.
Equipements
Clas à l'assaut du diagnostic automobile
Le spécialiste français de l'équipement d'atelier a profondément remodelé l'ensemble de ses gammes. Parmi ses nouveautés, Clas devient distributeur officiel des outils de diagnostic de la marque Thinkcar. Autant d'efforts qui nourrissent la croissance de l'entreprise.
MAIA de Maha : le robot qui révolutionne l'inspection de véhicules
Avec la présentation de son robot de réception active, le fournisseur d’équipements de garage a marqué les esprits lors du salon Automechanika 2024, à Francfort. Maha prévoit d'automatiser l’accueil des véhicules dès l’an prochain. Ce n’est cependant pas la seule innovation technologique de la marque destinée aux réparateurs et contrôleurs techniques...
Mega macs S 20, le nouvel outil de diagnostic de Hella Gutmann
Le mega macs S 20 de Hella Gutmann propose une solution de diagnostic multimarque moderne, flexible et accessible, compatible avec les appareils Android. L’outil est doté de fonctionnalités évolutives grâce à ses modules logiciels.
Adas : Hella Gutmann passe à la vitesse supérieure avec le CSC-Tool X 20
Profitant du salon Automechanika Francfort, Hella Gutmann a présenté son dernier outil de calibration d’Adas, le CSC-Tool X 20. L’équipement propose un processus d'étalonnage numérique guidé pour renforcer la précision de ces opérations à l’atelier.
Actia Multi-Diag : deux décennies au service des réparateurs
Actia fête les 20 ans de son outil de maintenance électronique Multi-Diag. À cette occasion, le groupe toulousain revient sur les grandes innovations de sa solution, dont sa dernière interface de communication, l’ACI3, commercialisée depuis la rentrée.
Hunter Engineering révolutionne les Adas à Automechanika 2024
Le fabricant d'équipements de garage Hunter Engineering dévoile en avant-première en Europe sa dernière solution de calibration d'Adas au salon de Francfort (Allemagne). Cet appareil, baptisé Ultimate Adas, élimine un grand nombre de configurations manuelles.
Solutions de freinage pour véhicules électriques : Brembo Beyond EV Kit
Dans le cadre de l'électrification des véhicules, il se produit un changement de paradigme fondamental qui ouvre de nouveaux horizons dans de nombreux domaines de l'automobile. C'est notamment le cas du système de freinage des véhicules, où la recherche de performances et de sécurité toujours plus élevées se conjugue avec la volonté simultanée de réduire l'impact environnemental.
KS Tools lance une servante made in France
L'outilleur KS Tools dévoile sa toute première servante d’atelier fabriquée en France. Dotée d'un système anti-basculement, elle sera disponible dès ce mois de septembre 2024.
FFED lance sa station de dépollution pour les deux-roues
Quelques mois après l'instauration du contrôle technique des véhicules de catégorie L, FlexFuel Energy Development (FFED) déploie Hy-Carbon 1000R. Il s'agit d'une station de nettoyage des moteurs des deux-roues par injection d’hydrogène.
Bosch étoffe son offre de pièces de direction avec des kits
L’équipementier augmente son offre de pièces de direction. Avec ces kits dédiés, Bosch propose ainsi aux réparateurs et à leurs distributeurs des gammes étendues pour améliorer la disponibilité de ces organes de sécurité.
Hella Gutmann dévoile son réglophare intelligent
La marque allemande d’outils et d’équipements d’ateliers, Hella Gutmann, lance le SEG V, un réglophare numérique de dernière génération. L’appareil a été conçu pour le contrôle et la réparation des systèmes d’éclairage les plus complexes.
Gys simplifie la soudure de goujons avec le Capatek 66 FV
Gys présente son Capatek 66 FV, un générateur industriel conçu pour souder efficacement des goujons de M3 à M8 sur divers matériaux. Avec sa technologie avancée et son pistolet ergonomique, il offre une cadence de soudage rapide et évite les marques et déformations sur les tôles fines.
KS Tools présente sa servante "Carbone" en édition limitée
"Carbone", c'est le nom choisi par la marque d'outillages KS Tools pour sa dixième servante proposée en édition limitée. Destinée aux ateliers automobiles, elle est composée de deux niveaux d'équipement et se distingue par sa finition noir mat.
Les ponceuses Mirka Deros II et Deos II : plus puissantes et ergonomiques
La marque finlandaise dévoile la nouvelle génération de ses ponceuses électriques Deros et Deos. Bénéficiant d’améliorations significatives, elles offrent une puissance de ponçage renforcée, un confort d'utilisation amélioré et des fonctionnalités avancées pour un travail plus efficace et plus sûr.
TechPRO 2 et Brain Bee Connex 2, les nouveaux outils de diagnostic de Mahle
L'équipementier allemand Mahle lance la nouvelle génération de ses outils de diagnostic TechPRO et Brain Bee Connex. Ces solutions offrent une interface repensée ainsi que des fonctionnalités améliorées pour un diagnostic plus rapide et plus efficace.
Quand les ateliers se préparent à l'électrique
Avec la hausse des ventes de véhicules électrifiés, les ateliers doivent s'équiper en conséquence. Ils ont désormais à leur disposition plusieurs gammes d'équipements et d'outillages selon les interventions à réaliser.
Tout le monde veut sa part du turbo
Un nombre croissant d'acteurs arrive sur le marché de cette pièce technique. Mais l'après-vente de turbocompresseurs reste exigeante. Nous assistons donc à une bataille autour des services et des prix.
L'équilibrage des roues, un enjeu grandissant
Les grandes roues sont source de défauts d'équilibrage, liés à l'importance prise par les bras de levier des balourds sur les axes et le plan de rotation. L'essor des dimensions dépassant les 20 pouces de diamètre de jante n'est donc pas favorable à un bon équilibrage. Aussi, une formation adaptée et une machine précise sont indispensables.
NRF maximise son offre de pièces VE et garde le cap sur le durable
Le fabricant néerlandais de pièces de refroidissement et de climatisation continue à renforcer son offre de rechange pour véhicules électriques (VE). Parallèlement, NRF applique sa stratégie "réduire, réutiliser, recycler" jusqu'à la livraison.
Un pont élévateur Muller Automotive pour contrôler la catégorie L
Le fabricant d'équipements d'atelier, Muller Automotive, lance un nouveau pont élévateur. Celui-ci répond aux exigences du contrôle technique de l'ensemble des véhicules appartenant à la catégorie L.
H2 Blaster, la station de décalaminage de Texa
Équipement développé par l’italien Texa, H2 Blaster combine hydrogène et oxygène pour nettoyer les organes impliqués dans le processus de combustion interne. L’opération permet ainsi de rétablir les performances optimales du moteur.
3M fait le plein de nouveautés
L'équipementier américain débute l'année 2024 tambour battant. 3M vient de présenter plusieurs nouveautés majeures en matière d'abrasifs, de produits de peinture et d'équipements de protection. De nouvelles preuves de son savoir-faire sur le plan de l'innovation.
Clas intègre son catalogue au logiciel Atelio After Market
En janvier 2024, 6 000 références du spécialiste de l'outillage et de l'équipement d'atelier ont été intégrées au logiciel Atelio After Market. Clas veut continuer d'accompagner au mieux les garagistes au quotidien.
Clas distribue désormais des outils de diagnostic
Le spécialiste de l'équipement d'atelier annonce une collaboration avec la marque d’outils de diagnostic électronique Thinkcar. Clas sera le distributeur exclusif en France des produits du fabricant chinois.
FlexFuel déploie sa station de nettoyage de FAP
Le spécialiste de la dépollution moteur a déjà installé une centaine de Carbon FAP. Lancée en juin 2023, cette station de FlexFuel remet à neuf les filtres à particules les plus encrassés lors d'une prestation simple et lucrative pour le garagiste.
Des démonte-pneus de plus en plus ergonomiques
Pour leurs opérations liées aux pneumatiques, les réparateurs exploitent des démonte-pneus qui ne sont pas nécessairement identiques. Les pneumaticiens et les autres ateliers peuvent opter pour des modèles répondant à des contraintes différentes.
La famille Martins s'agrandit avec trois nouvelles marques
Présent à Solutrans, le groupe canadien Martins Industries, spécialiste de l’équipement de garage, a mis en avant ses trois nouvelles marques : Tiretools, Tiresupp et Tirestow. Cette initiative vise à clarifier ses offres dans les domaines des outils et des fournitures pneumatiques, ainsi que des solutions d'entreposage.
Clas veut améliorer le confort de travail dans les ateliers PL
À Solutrans, Clas a mis en lumière ses solutions pour faciliter le quotidien des réparateurs de véhicules indistriels. Parmi elles, le spécialiste de l'équipement d'atelier et de l'outillage technique a présenté son support pour disques de freins PL et sa grue porte-batterie.
La vidange de liquide de refroidissement simplifiée
Si sa présence dans les ateliers est récente, elle séduit de plus en plus de réparateurs. La station de vidange de liquide de refroidissement permet de réaliser des opérations de purge et de remplissage rapidement et sans écoulement. Surtout, elle est utilisable tant sur les véhicules thermiques qu'électriques.
Rupes dévoile sa nouvelle mini-polisseuse
Rupes renforce sa gamme de polisseuses avec la HLR75 iBrid Mini. Offrant une double alimentation en énergie, elle se distingue aussi par sa conception permettant des applications dans des espaces restreints ou difficiles d’accès.
Provac a organisé sa première journée dédiée à l’équipement d’atelier
Le 19 octobre 2023, le spécialiste de l’équipement de garage a tenu la première édition de sa Journée Provac. Au cours de cet événement, le distributeur a notamment pu présenter les dernières nouveautés de ses marques Hunter, Hella Gutmann, Cemb et Du Quesne.
Bosch lance un kit de réparation de batteries
Pour faciliter la maintenance des batteries haute tension, Bosch annonce le déploiement d’une solution de remplacement des modules défectueux. Elle sera destinée, dans un premier temps, aux modèles Toyota et Lexus.
Gys facilite le débosselage avec son Airfix Draw Aligner
Gys propose une nouvelle équerre de tirage pour simplifier les travaux de smart repair. L’équipement se distingue par ses quatre patins en caoutchouc sur la plaque à ventouse, qui évitent le cisaillement du joint.
SDPAC sort de l’ombre
Filiale du groupe PAC, SDPAC s’est spécialisée dans la vente de matériel d’ateliers aux distributeurs. La société s’appuie à cette fin sur une offre de services complète et, surtout, sur un catalogue qui ne cesse de s’étoffer avec Nussbaum et Hofmann Megaplan.
Avec Pégase, Flauraud prend son envol sur l'équipement d'atelier
Le groupe Flauraud lance Pégase, une nouvelle marque dédiée à l'équipement d'atelier. Cette offre s'articule autour d'une gamme de produits complète et d'un accompagnement global.
Clas renforce son offre B-Line
La gamme budget du spécialiste de l'outillage et de l'équipement d'atelier continue de s'agrandir pour suivre une forte demande. Clas n'en délaisse pas sa ligne premium et sa volonté d'être précurseur sur l'électrique avec de nouvelles solutions.
Sam Outillage fait gagner les garages en efficacité
Le fabricant présente sa nouvelle gamme de solutions de rangement à Equip Auto 2023. X'Tower et X'Locker permettent aux garagistes de gagner du temps en atelier et de réduire leur consommation d'équipements.
AAG : Primetool lance une gamme "petit levage"
Lancée en 2019, la marque privée d’équipements de garages d’Alliance Automotive Group élargit son portefeuille produits. Primetool propose désormais une gamme "petit levage".
Colad dévoile ses nouveaux masques à peinture
La marque Colad met à jour sa gamme de protections individuelles avec deux nouveaux masques, A1P3 et A2P3. Ceux-ci sont particulièrement adaptés contre les vapeurs et les particules nocives.